Questions tagged [node]

The tag has no usage guidance.

Filter by
Sorted by
Tagged with
1 vote
1 answer
85 views

double_baking_evidence and double_endorsement_evidence

I understand the double_baking_evidence and double_endorsement_evidence.I need some help to understand the baker that performed the double_* and the baker that provided the evidence , does the ...
0 votes
2 answers
134 views

tezos-node syncing failed: "Json_encoding.construct: consequence of bad union"

I'm trying to get our tezos-node going again, but no matter what I do it seems to fail on block 1195254. Rebooting and upgrading the node haven't fixed the issue. Do I need to roll back a few blocks ...
3 votes
1 answer
95 views

"Missing protocol 'ProtoGenesis' for the current block" when I launch a node

"Missing protocol 'ProtoGenesis' for the current block" when I launch a node, the version is the newest.
1 vote
1 answer
24 views

how to input data of type maps

This is a multiasset holding contract with code to mint and burn FA2 tokens but I am confused ion how to provide the inputs as it is getting errored token_info is the metadata section I want to put ...
3 votes
1 answer
56 views

v13.0 starts the node. What is the parameter of RPC [duplicate]

Upgrade to v13.0 startup node why RPC can not work normally; my parameters: start --rpc-port 8732 --rpc-addr 0.0.0.0:8732 --allow-all-rpc 0.0.0.0:8732 ubuntu@VM-0-16-ubuntu:/data/xtz$ ./mainnet.sh ...
2 votes
0 answers
32 views

Off-chain view runs out of gas enumerating tokens

The off chain view enumerates all owners tokens by looping through them. At some point, when there are too many tokens added, the attached error starts throwing.
0 votes
1 answer
111 views

Error when starting node - Ubuntu server 20.04.2 LTS

I am receiving below error when starting the Tezos service. I have installed on the laptop with success so it must be something with the environment but I cannot wrap my head around it... Feb 12 00:32:...
0 votes
1 answer
47 views

Tezos nodes being disconnected

Recently we have been having issues with some of the nodes being disconnected all the time. They sometimes pull and push some blocks and sometimes don't even have time to do it. Generally, the logs ...
1 vote
1 answer
69 views

Node keeps throwing updater: COMPILATION ERROR

Not sure what happened, but every block it throws this at the end of the block. It seems to still be able to endorse and bake though. updater: COMPILATION ERROR Running on 006-PsCARTHA
1 vote
1 answer
32 views

Can't connect to self hosted Tezos node (Docker setup)

I'm trying to set up a new local node for Jakartanet using the docker setup, as I've done in the past for previous testnets. Unfortunately, no matter how I try to setup the node, it seems to fail to ...
0 votes
1 answer
79 views

Tezos node stuck on error (hangzhounet)

my tezos node is stucked on this error: Current head: BLpEPZhSw81k (timestamp: 2022-01-24T03:12:08.000-00:00, validation: 2022-01-24T11:41:02.077-00:00) Jan 24 12:41:03.343 - protocol_cache: start ...
1 vote
2 answers
125 views

Are there public mainnet nodes? And can we simply run JSON-RPC like /network/points against them?

I would like to call /network/points against one of the public nodes. I tried curl -s ipaddress/network/points after I got the addresses from Giga Node https://tezos.giganode.io/, but it returns ...
13 votes
5 answers
455 views

What are the best practices for hosting Tezos nodes with exposed RPCs?

If i host my own node, e.g. like TezBox does, what's the best practice regarding accessibility of certain RPC endpoints? TzScan already restricts certain calls, as described here. Tezos docs advise ...
1 vote
2 answers
107 views

Active test networks

There are many test networks on Tezos. What are the active and soon to be active public ones? How do we participate? Are there accessible public nodes?
1 vote
0 answers
10 views

Not Endorsing or Baking

I quite new to Baking and Endorsing. Run the whole setup from gitlab tezos. Connected my Nano ledger and everything seems to be setup, Run node ./tezos-node run --rpc-addr 127.0.0.1:8732 Run baker ./...
1 vote
1 answer
207 views

Can I import snapshot in docker?

How import snapshot in node which running in docker container? For example snapshot from https://tezosshots.com. I see only one variant, it's copy file from 7z archive in mounted volume directory. ...
0 votes
2 answers
48 views

make build-deps throws an error

I've tried installing cargo on $HOME and /tmp to no avail. Can anyone help out?
0 votes
1 answer
87 views

Jakarta testnet RPC does not work

I'm trying to run Jakarta testnet node locally. Node starts and syncs, but RPC does not work. docker-compose.yaml I'm using: version: "2" services: node: image: tezos/tezos:v13.0 ...
1 vote
1 answer
195 views

Tezos Development Toolchain

Are there similar libraries in Tezos ecosystem similar to the OpenZeppelin library and the Hardhat development environment in Ethereum?
0 votes
1 answer
61 views

Transfer operation in eztz js

Can anyone guide me how transfer operation performed in java script? I am using this function but i can`t transfer from one address to another. eztz.rpc.sendOperation(from, operation, keys) Kindly ...
2 votes
1 answer
74 views

No block to bake - Number of Rolls differs too

Node and services running fine but number of rolls differs in the baking tab to the Staking Balance. Next baking slot also not available. https://tzscan.io/tz1P6XUBesrXF2Jp6shmvPqb1M321GKKNcV1?...
3 votes
0 answers
77 views

Tezos is branched on a block XX which is too old

we've been seeing inconsistent errors when we broadcast to our full node. We use the latest block as our branch when broadcasting but still encounter this: Operation ...
1 vote
1 answer
26 views

Error with archive-node using tezos-k8s (kuberneties) Invalid data directory '/var/tezos/node/data'

I am using helm charts from https://github.com/oxheadalpha/tezos-k8s I have my own values.yaml to setup an archive node but when the node starts I get this error Invalid data directory '/var/tezos/...
1 vote
1 answer
119 views

Multinetwork: cannot activate test account (using faucet)

I am running a multinetwork node, with a mainnet node (P2P port 9732, RPC port 8732) and a delphinet node (P2P port 9733, RPC port 8733, config.json and data is in folder ~/tezos-delphinet/). Nodes ...
0 votes
1 answer
42 views

Error while setting up Tezster

While running the command: sudo tezster setup Encountered the error, sudo tezster setup [sudo] password for aditya: /usr/local/lib/node_modules/tezster/tezster.js:108 .action(async function(){ ...
0 votes
1 answer
45 views

node log - node.validator: fetching protocol PtEdo

Seeing the following warning in the node log node.validator: fetching protocol PtEdoTezd3RHSC31mpxxo1npxFjoWWcFgQtxapi51Z8TLu6v6Uq node running PsDELPH1 what's the issue? thx
1 vote
1 answer
24 views

can not injection/operation because 415 not support media type

i have get the sign transaction hash, then, i send RPC request(/injection/operation) like this to brocast operation, this is my junit test, but it return 415 not support media type, i guess because of ...
0 votes
1 answer
34 views

triggering outside actions from tezos

assuming I am running a tezos node, is there any way to create a smart contract in tezos that is capable of triggering outside actions? For example, sending an email to an address, or turning lights ...
0 votes
1 answer
46 views

Missing all endorsements, ithacanet

I had posted this question on slack (tezos-baking#application-support) but the feedback stopped. Haven't been able to find answers on slack, reddit or stack exchange that fit my scenario. Have a node ...
1 vote
1 answer
92 views

Checking block details in tezos

While running the tezos node, i was checking block details using RPC call(:8732/chains/main/blocks/). It will give block details. After 10 mins, if I check it will gone. The output is in empty page.
0 votes
0 answers
23 views

Getting "Ledger Application level error (sign-with-hash): Parse error"

Found a similar topic at After upgrading to 12.2 i'm getting baker errors: Ledger Application level error (sign-with-hash): Parse error but even after updating the Ledger baking app version to 2.3....
1 vote
1 answer
63 views

Updated Docker images and bootstrapping

I recently had to reboot my machine, and upon restarting the tezos services (using the alphanet.sh start command) it automatically pulled an updated image wiping out my previous context which meant it ...
2 votes
1 answer
82 views

Is it possible to set up a tezos node to watch a smart contract?

When running a Tezos node, is it possible to set up a subscription service so that you can be notified of transactions spending from, or interacting with a smart contract? For example, if you want ...
0 votes
2 answers
52 views

Too many few connections (0) on personnal node

Sorry, i'm kind of a noob here. I managed to get my personnal rpc node running on local network and it was fine for few weeks. I always had low connections but it worked (only 5 connections but it ...
2 votes
1 answer
70 views

Calling contract invocation operation in loop

I have some set of data which I am trying to push to my smart contract in loop. I use conseiljs to send data to smart contract. Here is the code depicting what I am trying to do. async function ...
0 votes
1 answer
17 views

'store is in an inconsistent state' after upgrading to tezos-node 12.0

tezos-node | Mar 22 07:16:10.676 - node.store: the store is in an inconsistent state: tezos-node | Mar 22 07:16:10.676 - node.store: Error: tezos-node | Mar 22 07:16:10.676 - node.store: ...
0 votes
1 answer
20 views

Does a rolling node have the information to serve RPC queries without relying on other, full nodes?

Does a rolling node have the information required to serve RPC queries without relying on other, full nodes? I am not interested past balances or contract states, but I do want to query the current ...
1 vote
1 answer
249 views

Tezos-node unable to validate block

Syncing an archive-mode node, was able to successfully sync up to block 867,487 (March 16, 2020) but now seem to be stuck validating 867,488. The only information in the logs is: validator.peer: ...
1 vote
2 answers
31 views

Unable to install tezos binaries - Debian

I guess the bottomline question: is there a way install the tezos binaries on Debian as described at https://tezos.gitlab.io/introduction/howtoget.html; in other words sudo add-apt-repository ppa:...
0 votes
0 answers
34 views

Unable to reactivate baker, ithacanet

Baker tz1fh2hMTTQKYejt4F4wCxyQAD1VenCpMEg3 on ithacanet became inactive yesterday, after it had failed to endorse since the beginning of rights. Endorsement problem may've been due to the remote ...
0 votes
0 answers
11 views

lorre failad after apply https://github.com/Cryptonomic/Conseil/releases/tag/2022-march-release-40

lorre error log 2022.03.31 01:28:54:908 [ERROR] tech.cryptonomic.conseil.common.config.package.printConfigurationError:10 - I'm not able to correctly load the configuration in Lorre application Please ...
2 votes
0 answers
46 views

How does TezEdge achieve parallelism?

I am researching on how to parallelize transaction validation in Tezos, and I came across TezEdge and this blog. Both of these articles mention that they use OCaml Runtime FFI Pools, but my primary ...
3 votes
2 answers
166 views

Maximum Peers Reached, Connection To Private Node Dropped

At 99 peers, my node 7a877820 (2019-12-11 15:02:03 +0100) starts getting Dec 17 06:48:30 - p2p.connection-pool: Swap to x.x.x.x.:9732 failed: Error: Dec 17 06:48:30 - p2p.connection-pool: ...
1 vote
1 answer
23 views

tezos error : branch refused (Error: Counter 3070118 already used for contract [ADDRESS_SMART_CONTRACT] (expected 3070119) [duplicate]

TezosWallet wallet = new TezosWallet(true, "c:\\temp\\Wallet1.txt", "My_PassPhrase"); wallet.setProvider("https://rpc.hangzhou.tzstats.com"); wallet.activate(...
0 votes
3 answers
124 views

How many nodes are there on Tezos?

And which website is the best to get this data from? Any screenshots of API pulled would be appreciated.
0 votes
1 answer
34 views

how to solve: docker mainnet.sh snapshot import corrupted store, genesis block not available

Been out of the Tezos for a bit and coming back. I've got a Raspi 4 with external USB 3 SSD booting Ubuntu Server and docker/docker-compose installed. The SSD is 220G at 23% usage. Trying to get a ...
0 votes
1 answer
19 views

Unable to get tezos-node to connect to P2P network

My tezos-node is unable to connect to the gossip network and synchronize with peers. I think some restrictions are imposed in my organization's network. I ran nmap on my organization' gateway IP ...
0 votes
1 answer
70 views

Can't submit transactions to node independent of ACL settings

I've set up two nodes - one for mainnet and one for testnet (currently Hangzhounet). Despite the nodes being up and healthy, and bootstrapped -- verified by ... tezos-client -E https://mainnet.<my-...
0 votes
0 answers
33 views

Using my own node in Temple wallet

I started a node on my VPS, what else do I need in order to use it in my Temple wallet? And how can I add restrictions on other users' use?
3 votes
2 answers
237 views

Forging operations - what is the purpose of this?

I keep seeing the words offline forging and forged mentioned in various Tezos blogs and tutorials. What is the purpose of forging?

1
2 3 4 5
7